This Rodeo 150cc 3 wheel trike is built well with a beautiful but strong and slick design. The rodeo will take you for a ride in five different colors (red, white, black ,orange and blue) that work well in the back drop of a sunny day. Its three wheels add to the stability of an already balanced and smooth ride. It is not only a strong and dependable source of transportation but it also offers fuel efficiency for the economy minded. So if you were looking for something that is street legal in all 50 states that will save gas, remain dependable down through the years this is your bike. It has aluminum rims, and as you would imagine can be striking on any three wheel moped, it has a electric start and automatic transmission with reverse, front and rear disc brakes just to mention a few of its many features. It comes with the same great warranty that cms offers for all of its scooters, motorcycles, atvs, go karts, dirt bikes, mopeds, and electric cars.
Engine type: 150cc, single cylinder, 4 stroke , air cooled
Starting system: Electric
Vehicle dimension: 80*40*40 IN
Wheel base: 60.2 IN
Wheel size: front 120/70-12 .rear 225/40-10
Seat height: 29.5 IN
Ground clearance: 5.1 IN
Transmission mode: chain
Ignition type: CDI
Fuel tank capacity: 4.9 L
Suspension: swing arm front
Brake: disc
G.W/N.W: 331 / 276 pounds
Carton size: 70*34*34 IN
Available color: black. white. red.blue |
|
◊ BE RESPONSIBLE!
BE A RESPONSIBLE RIDER! FOR SAFETY, READ YOUR OWNER'S MANUAL. ALWAYS WEAR A HELMET, EYE PROTECTION, AND PROTECTIVE CLOTHING! NEVER RIDE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL! Parents consider your youngsters age, size, ability, and maturity before allowing them to ride. Never ride on un-paved streets or non-public roads, and never carry passengers on your moped unless the specific model is able to carry two riders. Never engage in stunt driving or ride at excessive speeds. Be careful on difficult terrain. Riders under 16 years of age must be supervised by an adult. County Motorsports recommends that ALL riders take a training course. For more information visit the ASI website http://www.safety.org/.
◊ Very Reliable!
The 4-stroke scooter has been proven to be as efficient and reliable to competitors such as Honda and Yamaha. This streamline design motor is optimized to be extremely fuel efficient yet tuned to perform with maximum torque & power. Equipped with the leading Japanese components such as spark plug and throttle-body designed carburetor, no primer button or choke lever to mess with.
◊ Get Ready for Delivery!
The shipping carrier Estes Express http://www.estesexpress.com/ or any other carrier we use will call you 1-2 days before delivery to arrange a "block time" for delivery to ensure you are present for delivery. Please watch your phone and e-mail carefully 5+ days from the date of order. These mopeds are specially designed and manufactured to be sold online. They have special packaging (minimize shipping damage and missing parts), every scooter is tested at the factory (real test ride, not just started), your warranty is NOT void if you assemble it yourself, you get free tech support from the manufacturer, the scooter is delivered virtually fully assembled. Shipping takes anywhere from 3-10 business days depending on your location.
(DOT) Department of Transportation Certified
(EPA) Environmental Protection Agency Approved
A Bill of Sale & Certificate of Orgin (Title) Will be Sent by Postal Mail
- Free Shipping to your DOOR with LIFT-GATE Service. (others ship to local warehouse)
- Free Technical Support 1-702-628-5468 on all products purchased from our website.
- Parts shipped in 3-5 business days.
- Unit must be assembled - please read the purchaser responsibility below........
|
◊ Purchaser Responsibility |
|
Please remember that by purchasing a moped online, you are responsible for performing the setup that a dealer would normally perform - such as checking the tires, hooking up the battery, checking tightness of all nuts and bolts, changing oil, etc. Although we do provide some very good information and assembly manuals; occasionally some units may need other routine items checked/adjusted such as adjusting the carburetor idle and mixture screws, checking to ensure wires are well connected, adjusting chain slack and alignment, if needed. Since you are skipping a dealer and saving over half the price of a usual retail customer, you will need to perform the final assembly (as stated above). This will take generally 30-60 minutes to perform. While we will gladly assist you with any technical questions, we will cannot refund or exchange your unit if you cannot perform these basic functions or refuse to let a shop do it for you. By placing an order with CMS you agree to these terms. If you would like a dealer to perform the assistance and easy set-up for you, we have one of the only brick and mortar dealer networks to assist you with this function for a fee. Contact us with any questions.
